Firebacks

Edging: rope

232 results

  1. 1039

    cranbrook,_branden.jpg
    1070 x 767 mm

    Description: Canted rectangular shape; twisted rope edging (top and sides) in short lengths; top centre, initials above date.

    Notes: The initials are likely to be those of Richard Holden, clothier of Cranbrook, who inherited Branden near Sissinghurst in 1623 and who was living there in 1659.

    Inscription: RH / 1659

    Manufactured: in 1659 probably at Biddenden Furnace in the Weald area of England.

    Current location: in private hands, Cranbrook, Kent, England.

    Citation: Holden, E. S., 1897, 'The Holden Family of Cranbrook, Kent, England', New England Historical and Genealogical Register, 51, pp. 214-218.

  2. 1110

    crowborough,_luxford house 01.jpg
    >685 x 615 mm

    Description: Fragment; canted rectangular shape; twisted rope edging (top and sides); top right (i.e. probably top centre), unidentified (apparently inverted) ornamental capital letter 'T'; top left, a triple-loop fleur stamp; between, rose and crown.

    Notes: Probably slightly more than half of the original fireback, with stamps also seen on another, commonly copied, fireback. It might reasonably be supposed that the missing half may have also included an ornamental letter, companion to the surviving example. Formerly at Bentley, Halland, Sussex.

    Manufactured: in the late-16th century in the Weald area of England.

    Current location: in private hands, Crowborough, East Sussex, England.

    Citation: Fitt, H. F., 1931, 'Queries: Sussex Iron, II', Sussex Notes and Queries, 3, 8, p. 255.

  3. 1111

    crowborough,_luxford house 02.jpg
    615 x 610 mm

    Description: Arched shape; twisted rope edging (top and sides); top centre, over-pressed Tudor rose stamp on a square block; large diamond-shaped stamp with fleur-de-lys repeated each side below rose, both over-pressed.

    Notes: The diamond-shaped stamp has been seen on other firebacks; one of the stamps appears to have been repositioned twice before casting.

    Manufactured: in the mid- to late-16th century in the Weald area of England.

    Current location: in private hands, Crowborough, East Sussex, England.

  4. 1114

    crowborough,_luxford house 05.jpg
    895 x 500 mm

    Description: Rectangular; twisted rope edging (top and two-thirds down sides); rope length across each top corner.

    Notes: The twisted rope lengths are particularly well defined.

    Manufactured: in the mid- to late-16th century in the Weald area of England.

    Current location: in private hands, Crowborough, East Sussex, England.

  5. 1115

    crowborough,_luxford house 06.jpg
    >935 x 470 mm

    Description: Fragment; canted rectangular; twisted rope edging (topand sides); central cross of twisted rope.

    Notes: Sections missing at both ends.

    Manufactured: in the 16th century in the Weald area of England.

    Current location: in private hands, Crowborough, East Sussex, England.

  6. 955

    crowther_01.jpg
    914 x 838 mm

    Description: Composite; canted arched rectangular shape; armorial fireback, cavetto edging, with Stuart Royal arms, garter, supporters, crown and motto, and 1620 date above crown; this overlies a canted rectangular plate, with twisted rope edging, fillet; two quasi-horizontal fillets from the tops of the vertical sides to the middle of the armorial fireback separate the back into two uneven parts, the date in the top part, split by the armorial, and a fleur-de-lys at the top of the lower part, also separated by the armorial.

    Notes: The use of the armorial back is seen frequently and probably dates from 1619, though the date is usually altered; in this case the alteration does not match the more prominent date for the fireback; photograph ex T. Crowther & Son Ltd, 1985.

    Inscription: 16 29 / HONI SOIT QUI MAL Y PENSE / 16 37 / DIEV ET MON DROIT

    Arms: English Stuart royal

    Manufactured: in 1637 possibly in the Forest of Dean area of England.

    Current location:, not known.

  7. 41

    cuckfield_park 02.jpg
    765 x 675 mm

    Description: Arched rectangular shape; rope edging (top and sides); Tudor royal shield, garter, crown and supporters (crowned lion and dragon); date above crown; empty motto compartment with initials below.

    Notes: Identical arms can be seen on fireback formerly at Baynards Park, Cranleigh (no. 200), and on one in private hands at Maresfield (no. 482), neither of which have the motto compartment; minor variations in the position of individual elements indicate that the garter and shield, crown, and each supporter were separately stamped; the initials are likely to be those of Henry Bowyer, ironmaster (d.1588), the fireback perhaps being made in his memory.

    Inscription: 1588 HB

    Arms: Tudor royal (Elizabeth I)

    Manufactured: in 1588 possibly at Pounsley Furnace, Framfield in the Weald area of England.

    Current location: in private hands, Cuckfield, West Sussex, England.

    Citation: Hodgkinson, J. S., 2010, British Cast-Iron Firebacks of the 16th to Mid-18th Centuries (Crawley, Hodgers Books).

  8. 267

    dawson_02.jpg
    1422 x 914 mm

    Description: Rectangular; twisted rope edging (top and sides); top centre, crowned Tudor royal shield (over-pressed) between a leopard passant guardant sinister (on the left) and a leopard passant (on the right); below, crowned shield bearing initials, KH, above a fleur-de-lys, between two further leopards, styles as above; below the lower shield, two 'imp' figures, the left one with both arms lowered, the right with its right arm raised; outside each lower leopard, a crowned rose (over-pressed); each top corner, a pair of ‘imp’ figures styles as before.

    Notes: One of the 'Royal' series. Illustration from Dawson 1903. Formerly in the collection of Dr C. Prince, of Crowborough, Sussex. Further deterioration at the bottom of the casting has caused some loss of metal.

    Inscription: KH

    Arms: Tudor royal arms of England

    Manufactured: in the mid-16th century in the Weald area of England.

    Current location: Leeds Castle, Leeds, Kent, England.

    Citation: Balcomb, J. T., Nov. 1886, 'An Extinct Sussex Art', The Art Journal, pp. 337-340.

    Citation: Dawson, C., 1903, 'Sussex Iron Work and Pottery', Sussex Archaeological Collections, 46, pp. 1-54.

    Citation: Gardner, J. S., 1898, 'Iron Casting in the Weald', Archaeologia, 56, 1, pp. 133-164.

    Citation: Garner, T. and Stratton, A., 1911, The Domestic Architecture of England during the Tudor Period, Part III (London, Batsford), pp. 240-2 and pl. CLXXIX.

  9. 273

    dorton_house.jpg
    1200 x 775 mm

    Description: Rectangular with twisted rope edging top and sides; central arch with twisted rope edging; date in arch (8 with flattened top); initials repeated in top corners.

    Notes: An unusually large plate to have such simple decoration.

    Inscription: 1648 / TK TK

    Manufactured: in 1648 in England.

    Current location: in private hands, Dorton, Buckinghamshire, England.

    Citation: Hodgkinson, J. S., 2010, British Cast-Iron Firebacks of the 16th to Mid-18th Centuries (Crawley, Hodgers Books).

  10. 1177

    dudley_archives.png
    ? x ? mm

    Description: Canted rectangular shape; twisted rope edging (top and sides); top centre, inscription 'C1630C'.

    Notes: In the inscription, the letter 'C' may have been formed from a horseshoe. The fireback was discovered in 1959 at the works of Samuel Lewis & Co. Ltd. at Netherton, Worcestershire. It has been suggested that it was probably made by Walter Chetwynd, tenant of the ironworks at Cannockwood in Staffordshire who is mentioned as such in accounts of 1636 and 1637 made by Roger Jones received for William, Lord Paget of Beaudesert, the owner of the works.

    Inscription: C1630C

    Manufactured: in 1630 possibly in the Cannock Chase area of England.

    Current location: not known.