Firebacks

Jacobean royal armorial firebacks

15 results

  1. 995

    085.jpg
    550 x 680 mm

    Description: Arched; fillet edging; English royal Stuart shield, garter, crown, supporters, 'CS' monogram to left of Garter buckle, and motto on a cartouche; small rose stamp repeated each side of crown; date split each side of top of crown (first part absent in this casting).

    Notes: Although English arms, the design is in a continental style, arched firebacks being typical of Lorraine; the 'CS' monogram is likely to be that of the pattern-maker; a modern copy of a poor casting, hence the incomplete date.

    Copies of this fireback are known.

    Inscription: [16 missing] 21 / HONI SOIT QVI MAL Y PENSE / CS / DIEV ET MON DROIT

    Arms: English Stuart royal (James I)

    Manufactured: in 1621 in England.

    Current location:.

  2. 849

    ashurst,_peppers farm.jpg
    ~600 x ~435 mm

    Description: Rectangular with superimposed arch; embattled, cavetto moulded edging, with the top edge of the rectangle interrupted; shield, garter, crown, supporters and motto of the English Royal house of Stuart; rose and thistle plants above lion and unicorn supporters respectively; initials split by crown; date below garter.

    Notes: A version dated 1619 is proportioned slightly differently.

    Copies of this fireback are known.

    Inscription: I R / 16 21

    Arms: English Stuart royal - James I

    Manufactured: in 1621 in England.

    Current location: in private hands, Ashurst, West Sussex, England.

  3. 1062

    bradford-on-avon,_westwood manor 02.jpg
    ?550 x ?600 mm

    Description: Rectangular with ogee arch; ovolo, egg and dart edging; shield, garter, helm, mantling, crest and motto of the English House of Stuart; date split either side of garter buckle.

    Notes: One of several firebacks, all of the same date, but varying in size, framing style and moulding; all have stylistic features in common and will have been the work of the same pattern maker, who was also responsible for carving royal coats of arms in three West Country churches.

    Copies of this fireback are known.

    Inscription: HONI SOIT QVI MAL Y PENSE / 16 18 / DIEV ET MON DROIT

    Arms: English Stuart royal (James I)

    Manufactured: in 1618 possibly in the Forest of Dean area of England.

    Current location: Westwood Manor, Bradford on Avon, Wiltshire, England.

    Museum number: 222503.1 (part of the National Trust museum group)

  4. 28

    burwash,_batemans 06.jpg
    665 x 740 mm

    Description: Rectangular with pediment raised on inverted consoles; ovolo, egg and dart edging; shield, garter, helm, mantling, crest and motto of the English House of Stuart; date split either side of garter buckle.

    Notes: One of several firebacks, all of the same date, but varying in size, framing style and moulding; all have stylistic features in common and will have been the work of the same pattern maker, who was also responsible for carving royal coats of arms in three West Country churches.

    Copies of this fireback are known.

    Inscription: HONY SOIT QVI MAL Y PENSE / 16 18 / DIEV ET MON DROIT

    Arms: English Stuart royal (James I)

    Manufactured: in 1618 possibly in the Forest of Dean area of England.

    Current location: Bateman's, Burwash, East Sussex, England.

    Museum number: NT/BAT/M/215 (part of the National Trust museum group)

    Citation: Hodgkinson, J. S., 2010, British Cast-Iron Firebacks of the 16th to Mid-18th Centuries (Crawley, Hodgers Books).

    Citation: Hodgkinson, J. S., 2017, 'Church Armorials and Firebacks: Evidence of an Early 17th-Century Woodcarver', Transactions of the Bristol and Gloucestershire Archaeological Society, 135, pp. 213-223.

  5. 229

    cardiff,_st fagans 07.jpg
    505 x 520 mm

    Description: Rectangular with superimposed arch; embattled, cavetto moulded edging, with the top edge of the rectangle interrupted; shield, garter, crown, supporters and motto of the English Royal house of Stuart; rose and thistle plants above lion and unicorn supporters respectively; initials split by crown; date below garter.

    Notes: A different version is at Newick Park, Sussex.

    Copies of this fireback are known.

    Inscription: I R / HONI S OIT QVI MAL Y ..ENSE / 16 19

    Arms: English Stuart royal

    Manufactured: in 1619 in England.

    Current location: National History Museum, St Fagans, Glamorgan, Wales.

    Museum number: 48.354/85 (part of the Welsh National History Museum museum group)

    Citation: Hodgkinson, J. S., 2010, British Cast-Iron Firebacks of the 16th to Mid-18th Centuries (Crawley, Hodgers Books).

  6. 880

    christies_19-06-12 560mm x 610mm.jpg
    560 x 610 mm

    Description: Rectangular with ogee arch; ovolo, egg and dart edging; shield, garter, helm, mantling, crest and motto of the English House of Stuart; date split either side of garter buckle.

    Notes: One of several firebacks, all of the same date, but varying in size, framing style and moulding; all have stylistic features in common and will have been the work of the same pattern maker, who was also responsible for carving royal coats of arms in three West Country churches. Christie's auction 19 Jun 2012 lot 191.

    Copies of this fireback are known.

    Inscription: HONI SOIT QVI MAL Y PENSE / 16 18 / DIEV ET MON DROIT

    Arms: English Stuart royal (James I)

    Manufactured: in 1618 possibly in the Forest of Dean area of England.

    Current location:.

    Citation: Hodgkinson, J. S., 2017, 'Church Armorials and Firebacks: Evidence of an Early 17th-Century Woodcarver', Transactions of the Bristol and Gloucestershire Archaeological Society, 135, pp. 213-223.

  7. 994

    koldewij_collection 01.jpg
    580 x 730 mm

    Description: Arched; cavetto-moulded edging; English royal Stuart shield, garter, crown, supporters, and motto on a cartouche; a monogram of S and C lies to the left of the Garter buckle; a small rose stamp is repeated each side of crown; date split each side of top of crown.

    Notes: Although English arms, the design is in a continental style, arched firebacks being typical of Lorraine. In some later recastings the proportions have been distorted, making them narrower, and the '16' of the date is missing. The fireback illustrated was formerly in the city museum of Vlissingen in the Netherlands.

    Copies of this fireback are known.

    Inscription: 16 21 / HONI SOIT QVI MAL I PENSE / SC / DIEV ET MON DROIT

    Arms: English Stuart royal (James I)

    Manufactured: in 1621 possibly in the Lorraine area of France.

    Current location:.

    Citation: Starkie Gardner, J., 1898, 'Iron Casting in the Weald', Archaeologia, 56, 1, pp. 133-164.

  8. 360

    lamberhurst,_scotney castle 01.jpg
    780 x 580 mm

    Description: Arched rectangular shape; ovolo edging; Stuart royal arms of England (quarterly, 1st and 4th, France and England, 2nd Scotland and 3rd Ireland) with garter, crown, motto and supporters; initials either side of lionís head; date either side of unicornís head.

    Notes: The slightly awkward positioning of the date suggests it was added later.

    Copies of this fireback are known.

    Inscription: I R [Iacobus Rex] 16 04 / DEV ET MON DROIT

    Arms: English Stuart royal - James I

    Manufactured: in 1604 possibly in the Weald area of England.

    Current location: Scotney Castle, Lamberhurst, Kent, England.

    Museum number: NT/SCO/M/62 (part of the National Trust museum group)

    Citation: Hodgkinson, J. S., 2010, British Cast-Iron Firebacks of the 16th to Mid-18th Centuries (Crawley, Hodgers Books).

  9. 406

    lewes,_sussex arch soc 040.jpg
    590 x >515 mm

    Description: Arched rectangular shaped; convex moulding (top and sides surviving); scrolled protrusions above top corners; Stuart royal shield, crown, garter, supporters and motto; initials separated by crown.

    Notes: The scrolled protrusions suggest a possible association with other firebacks with similar features.

    Inscription: I R / HONI SOIT QVI MAL Y PENSE

    Arms: English Stuart royal - James I

    Manufactured: in the early 17th century possibly in the Weald area of England.

    Current location: Anne of Cleves House, Southover High Street, Lewes, East Sussex, England.

    Museum number: LH000.944 (part of the Sussex Archaeological Society museum group)

    Citation: Hodgkinson, J. S., 2010, British Cast-Iron Firebacks of the 16th to Mid-18th Centuries (Crawley, Hodgers Books).

  10. 277

    london,_museum_of_london_895x875_80_271_92.jpg
    895 x 875 mm

    Description: Arched rectangular with cavetto-moulding along top, supported by Ionic pilasters; English Stuart royal shield, garter, helm, crown, motto and supporters; date below and either side of garter.

    Notes: One of several firebacks, all of the same date, but varying in size, framing style and moulding; all have stylistic features in common and will have been the work of the same pattern maker, who was also responsible for carving royal coats of arms in three West Country churches.

    Copies of this fireback are known.

    Inscription: I R [Jacobus Rex] / HONI SOIT QVI MAL Y PENSE / 16 18 / DIEV ET MON DROIT

    Arms: English Stuart royal (James I)

    Manufactured: in 1618 possibly in the Forest of Dean area of England.

    Current location: Museum of London, 150 London Wall, London, England.

    Museum number: 80.271/92 (part of the Museum of London museum group)

    Citation: Hodgkinson, J. S., 2010, British Cast-Iron Firebacks of the 16th to Mid-18th Centuries (Crawley, Hodgers Books).

    Citation: Hodgkinson, J. S., 2012, 'Pre-Restoration Iron Firebacks', Journal of the Antique Metalware Society, 20, pp. 2-15

    Citation: Hodgkinson, J. S., 2017, 'Church Armorials and Firebacks: Evidence of an Early 17th-Century Woodcarver', Transactions of the Bristol and Gloucestershire Archaeological Society, 135, pp. 213-223.